What should be paid attention to during the installation of reverse osmosis equipment?

With the continuous research and development of reverse osmosis technology, various brands of reverse osmosis equipment have emerged in the water treatment field. This equipment helps us purify water more effectively, removing various dissolved substances, organic matter, colloids, microorganisms, bacteria, and other impurities from the raw water to meet the water requirements of industrial production. So, what should we pay attention to when installing reverse osmosis equipment?

　　Let's discuss some points to consider when installing reverse osmosis equipment:

　　1. We need to place the reverse osmosis pure water unit and pre-treatment unit close to the power and water sources.

　　2. Filter materials should include activated carbon, softening resin, quartz sand, etc.

　　3. Water connection: Connect the water source to the raw water pump inlet, the pre-filter outlet to the unit inlet, and then connect the pre-treatment unit and the unit drain to the sewer through pipelines.

　　4. Circuit: First, reliably ground the grounding wire, then connect the power cord to the electrical control box in the room.

　　5. Turn on the water and power sources. According to the relevant operating instructions for pre-treatment, perform pre-treatment operation and debugging.

　　6. To use the unit, switch the raw water pump to the automatic position, and then turn the stop switch. Then turn on the water and power sources. When the pressure at the multi-stage pump outlet reaches the set value, the multi-stage pump starts to operate.