Detailed explanation of stainless steel water tank installation and maintenance

Production Process

      1 Main machinery required for welding stainless steel water tanks: Computer pulse seam welding machine, semi-automatic rolling machine, spot welding machine, plasma cutting machine, electric scissors;

      2 Machinery required for welding stainless steel water tank brackets: Electric welding machine, cutting machine, multi-purpose angle steel bending machine;

      3 Machinery required for welding stainless steel water tanks: TIG welder.

Installation Instructions

      1 Water tank foundation requirements

      The geometric dimensions of the concrete foundation should be formulated according to GB02S101 Relevant regulations. The height difference of the concrete foundation plane <5mm。

      2 Installation, construction and acceptance of stainless steel water tanks

      Professional welders perform on-site TIG welding. Standard power supply is available at the construction site. There is ≥500mm Maintenance space around the water tank. External inspection shows no rust or pollution: Fill with water 2-3h The tank is not significantly deformed, and there is no leakage in the weld, which is considered qualified.

      3 Use, maintenance and upkeep of the water tank

      When installing pipes, do not apply excessive load to the inlet and outlet of the pipes. Do not directly apply the weight of valves and large-diameter pipes to the water tank outlet. If necessary, install pipe supports: Expansion joints must be installed for the expansion, contraction, and vibration of welded pipes.

      Stamped stainless steel plate welded water tanks use stainless steel plates stamped with reinforcing ribs, and are welded together with stainless steel welding strips, with a simple structure, good strength, and can manufacture water tanks of larger capacity. Because the tank body is made of a whole stainless steel plate welding, it completely blocks the sunlight, so it will not breed algae. This keeps the water quality clean.

Installation and commissioning

(1) Testing

      The foundation of the stainless steel water tank can use concrete beams , I-beams or “C” Channel steel. The top of the stainless steel water tank is equipped with a ventilation air filter device, the specifications and quantity of which are determined by the manufacturer according to the size of the inlet. The inside of the stainless steel water tank uses tie rods. All pipe flange connections are 1.0MPa Standard flanges. When designing the location of the water tank, refer to GB17051-1997 Secondary water supply facility hygiene standards. If the specifications, technical parameters, or orientation of the water tank are not suitable for actual use, the stainless steel water tank designer shall determine them according to actual needs.

      1 Stainless steel water tank full water test, 48 Hours without leakage;

      2 Leakage at pipe connections, valves, and related accessories;

      3 Observe whether the operation of the water supply system is normal;

      4 Check whether the water disinfection system is working normally.

(2) Cleaning

      1 Close the inlet valve and open the drain valve to drain the water from the tank;

      2 Enter the water tank via the ladder;

      3 Clean the periphery and bottom of the water tank with a clean mop or cloth. For severe fouling at the bottom, use a soft towel and detergent to scrub;

      4 Open the inlet valve, add an appropriate amount of clean water to rinse the tank walls and bottom, allowing the dirt to drain from the drain outlet. If necessary, repeat this several times until satisfied;

      5 Close the drain valve, open the inlet valve, and refill the tank with water. The cleaning work is complete.

(3) Specifications

      Stainless steel square assembled water tanks can be from O.5T-2000T And can undertake different types of special production according to customer needs.

      Stainless steel circular water tanks can be from 0.5T-200T And can undertake different types of special production according to customer needs.

Maintenance steps

      Tips for protecting stainless steel water tanks Stainless steel water tanks are the popular new generation of water tanks. Compared with other water tanks, they have advantages such as light weight, corrosion resistance, high temperature resistance, and high strength. In order to use them for a longer time, you need to protect your water tank well, but how do you protect it?

      The steps are as follows: First, close the water inlet valve, then open the drain valve, drain the remaining water in the tank, then enter the stainless steel water tank via the ladder, and use a clean mop or cloth to clean the dirty parts of the water tank. If the dirt is severe, you can also buy a detergent to clean it, then store water, rinse away the cleaning, repeat this several times, then close the drain outlet, open the gate, and refill the water. In this way, the stainless steel water tank is well protected.